一、配置网络
1、更新软件源-使用科技lion脚本
bash <(curl -sL kejilion.sh)2、安装 ifupdown2
sudo apt update
sudo apt install -y ifupdown23、卸载并停用NetworkManager服务
sudo systemctl stop NetworkManager
sudo systemctl disable NetworkManager
sudo apt purge -y network-manager安装DHCP客户端
apt update
apt install isc-dhcp-client4、编辑网卡配置文件
sudo nano /etc/network/interfaces添加如下参数
auto lo
iface lo inet loopback
# 删除 auto eth0
# eth0 只作为桥接成员，不单独启动
iface eth0 inet manual
pre-up ip link set dev eth0 address 5F:07:7D:37:EB:6B
pre-up sleep 1
auto wlan0
iface wlan0 inet dhcp
auto vmbr0
iface vmbr0 inet dhcp
bridge-ports eth0
bridge-stp off
bridge-fd 0
allow-hotplug eth0
allow-hotplug wlan0
allow-hotplug vmbr0
重启网络服务
systemctl restart networking二、配置hosts
sudo nano /etc/hosts127.0.0.1 localhost
192.168.31.2 armbian.pvetest.com armbian #本地ip地址，必须设置
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters三：修改源
如果是安装 pve8, 且版本为 bookworm，则添加如下源
echo "deb https://mirrors.apqa.cn/proxmox/debian/pve bookworm port">/etc/apt/sources.list.d/pveport.list如果是安装 pve7, 且版本为 bullseye，则添加如下源
echo "deb https://mirrors.apqa.cn/proxmox/debian/pve bullseye port">/etc/apt/sources.list.d/pveport.list添加 apt-key
curl https://mirrors.apqa.cn/proxmox/debian/pveport.gpg -o /etc/apt/trusted.gpg.d/pveport.gpg 四：安装Proxmox VE
使用正确的 path
export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin安装 Proxmox VE
apt update && apt install -y proxmox-ve弹窗选 no
更新 ifupdown2
sudo apt update
sudo apt install -y ifupdown2五：更新 ssl 证书
自签名证书
openssl req -x509 -nodes -days 3650 -newkey rsa:2048 -keyout server.key -out server.crtopenssl x509 -in server.crt -out server.pem -outform PEM移动证书位置
cp server.pem /etc/pve/nodes/armbian/pveproxy-ssl.pem
cp server.key /etc/pve/nodes/armbian/pveproxy-ssl.key重启 PVE 网页服务
systemctl restart pveproxy六：放行端口8006
打开网址
评论区